Key Features of the Curved LED Display Stand
Five things that decide whether a curved display stand earns its floor space — geometry, merchandising, content, mobility and running cost.
Curved Four-Side Screen, 320×960mm × 4
Each of the four faces is a 320×960mm curved LED panel — 1.2288㎡ in total, 1×6×4 modules per cabinet. Because the faces curve, the image is still readable as a shopper approaches from the side of the aisle instead of walking straight into a flat poster. P1.25–P2.5 pixel pitch with 14–16Bit grey scale and 3840 / 7680Hz refresh keeps product shots and text sharp at close range, and the GOB-coated surface resists water, impact and oxidation.
- Four curved 320×960mm faces · 1.2288㎡ total
- P1.25–P2.5 · 14–16Bit · 3840 / 7680Hz
- GOB coated: waterproof, anti-collision, anti-oxidation
Top Showcase — Sell the Product, Not Only the Poster
The transparent showcase on top of the cabinet puts the physical product — a handbag, a pair of shoes, a device, a cosmetics set — at eye level, visible from every direction, while the curved screen below carries the campaign around it. That removes the second glass case a shop usually buys, powers and moves. The case is a display volume rather than a fixed insert, so the same stand works for the next launch: swap the product, change the content.
- Transparent showcase, 360° product visibility
- Screen and product in one movable unit
- Re-usable for the next campaign
Mobile APP Content Control
Posters, promotional video and campaign copy are uploaded wirelessly from the dedicated mobile APP — no computer, no USB stick and no technician on site. The four faces can run identical content or separate schedules, so one stand can promote a weekend offer on the side facing the escalator and a new arrival on the side facing the tills. New launches and holiday campaigns go live in one click, whether you run a single store or a chain.
- Upload from a phone, no technician visit
- Same content or separate schedules per face
- One-click updates for launches and holidays
Roll It, Lock It, No Installation Crew
The unit arrives assembled and runs on lockable casters. One person rolls the 28.5 Kg cabinet to the promotion zone, the store entrance or the next shopping-mall spot, then locks it in place in seconds — no dismantling, no lifting and no second pair of hands. Because it is plug & play, a new curved LED stand can be promoting the same day it arrives, and stored against the wall between campaigns.
- Lockable casters, one-person handling
- 28.5 Kg — reposition and lock in seconds
- Plug & play, no installation crew
147W Average for All-Day Playback
Average power consumption is 147W with a 492W maximum, so running the stand through a full trading day costs little — and the ceiling for a whole chain of stands stays predictable. Combined with magnetic front maintenance and GOB-protected panels, the operating cost is dominated by the content, not by the hardware.
- 147W average · 492W maximum
- Magnetic adsorption, front maintenance
- Built for multi-store rollouts
